Spraying a clear coat over a example coat protects the base coat from damage.
Picture a surface using a mould coat followed by a unrestrained coat provides you with a whitewash coverage complete with Profundity. It besides protects the surface from wear and tear. Rinse the nature with Disinfected doctor and then pat the surface dry with a cloth.2. Mask off the sphere to be painted with masking tape. Abode the tape along the edges of any existence adjoining the surface you want to protect from distemper overspray.
Instructions
1. Disinfected the surface with a cleanser formulated specifically for the surface type. Manipulate a sponge to remove loose dirt and debris, or a scrub brush whether the dirt deposits are demanding to remove. The pattern coat, applied with an airbrush for rapid placement, is your colour coating. With so many colours available, you can match any d cor, much creating patterns with the airbrush that gamut from intelligible colour blends to confused artistic paintings. Applying a sunny coat over the replica adds Profundity, shifting glowing fini the coating to concoct subtle changes in the applied colours. The shining coat prevents the model coat from fading, while absorbing burnished damage.
Adoption masking paper whether the adjoining surface is a barn door one.
3. Sand the primer dye with a medium-grit sandpaper to roughen the surface slightly for more advantageous adherence of the whitewash and to remove any imperfections. Cause a Hand-bill locomotion when sanding to avoid leaving patterned lines that may indicate through the paint. Remove any dust from sanding by wiping the area with tack cloth.
4. Paint the base coat onto the surface using an airbrush. Thin the paint with a compatible paint thinner, according to the airbrush manufacturer's instructions. Fill the paint reservoir to the fill level with paint and close the reservoir tightly to the brush body. Hold the airbrush 6 inches and slightly to the left of the painting surface and turn on the compressor. Press the trigger to start spraying.
5. Move your arm to the right to start applying the paint to the surface. Starting the spray slightly before the start of the surface will prevent feathering of the paint along the surface edge, instead leaving a solid even coverage from the edge inward. Apply the paint with long strokes, covering the surface to a point slightly to the right of the surface edge to prevent feathering there further. Maintain the direction of the nozzle toward the surface, moving your entire arm rather than your wrist, to keep from undercutting the masking tape with the paint.
6. Apply several thin layers of the base coat, building up a solid coating of paint. Let the paint dry two hours between each layer applied.
7. Switch to a clear coat of paint. Spray the clear coat over the base coat in three layers. Make the first layer as light as possible to seal the base coat. Follow with two slightly heavier layers to add a protective wear layer above the base coat layer. Wait two hours after each clear coat layer before applying the next. Allow the final layer of clear coat to dry overnight before removing the masking tape.
