The tire is the factor of the revolve that makes contact with the road--the tube is located inside of the tire, and contains the air giving the tire back.
Bicycle tires own an internal tube that, when entire with air, provides the circle with backing. Whether the tube is punctured, the air contained within Testament escape, causing the tire to potency Apartment lodgings. While tubes are quite inexpensive, it is expanded cost-effective to lick to establish the tube than to interchange it. In many instances, a punctured tube can be repaired using a low-cost tire repair utensils, which can be form at most retailers selling bicycles and bicycle accessories. The subject of kits Testament vary depending on Trade-mark and expenditure, on the other hand the basic items included in a tire repair apparatus are patches, tire glue and sandpaper.
Instructions
1. Turn the bike upside down so it is resting on the seat and handlebars.
2. Remove the bolt at the centre of the rim of the circle to be worked on. Once the bolt is loose, remove the revolve. You might longing to unhook your brakes to receive the shove off. To unhook the brakes, squeeze the brakes well-balanced, then slide the brake cable away of the brakes. The brakes Testament away be loose, and the revolve Testament fit between them for Emigration.
3. Slide the Apartment lodgings neb of the tire lever between the tire and the rim, then pry the tire elsewhere. Profession the object sorrounding the plentiful turn to remove the tire. Cause a moment tire lever to Celebrate the tire off of the rim provided the tire keeps slipping back into city. The glue should be applied to an area slightly larger than the patch itself. Allow the glue to dry, which should take about five minutes.9.
Over-inflate the tube once the tire has been removed. The over-inflation Testament guidance to fix the puncture. Provided you cannot see the puncture, listen for the leak, as you may be able to hear the air escaping from the tube. If you are still unable to locate the leak, try submerging the inflated tube in water and look for the bubbles produced by the escaping air.
5. Draw a circle around the area of the puncture, then draw an "X" inside of the circle, with the two lines crossing at the puncture location. If the leak is by the valve or if the tire is severely torn (more than just a puncture), you will need to replace the tube.
6. Release all of the air from the tube by connecting the air pump to the air valve and allowing the air to escape. You will be able to hear the air escaping from the tube.
7. Sand the area around the leak using the sandpaper that is included with the tire repair kit. Sanding will create a coarse surface, allowing the patch to be attached more firmly.
8. Spread the glue over the area to be patched. The tire lever can be attached to the spokes using the incision on the backside of the stuff to clutch the tire off the rim. The other tire lever can then be used to remove remainder of the tire.4.
Place the patch on the tube and apply heavy pressure for at least 60 seconds. Achieve heavy pressure by standing on the patch, applying all of your body weight, to bond the patch to the glue. Remove the plastic from the patch to complete the repair.
10. Replace the tire, reconnect the wheel and brakes, then inflate the tire.
