Rear bumpers capture a parcel of damage from being rear ended in traffic, backing into matters and yet from growth bumped by vehivle doors or shopping carts in parking lots. This can cutting edge to dents in rear bumpers, all the more though they are prepared of Supple, durable, thick plastic facts. You can repair dents in rear bumpers in less than two hours using materials from an Car parts store.
Instructions
1. Sand the dented areas using 120 grit sandpaper. This removes the whitewash from the inside and approximately the dent, which prepares the surface for repair. Sand inside the dent and all over the dent up to three or four inches.
Bag the sanding block with 220 grit sandpaper to sand the Dried apricot filler until it is smooth with the surface of the bumper. The sanding block helps conserve the surface smooth, where sanding with your plam can practise the finished surface unlevel because of uneven pressure with your fingers and palm.4. Dried apricot filler won't stick to the stain and Testament eventually crack and flake off. Let the filler dry for 30 minutes.
3.2. Employ a thick coat of Supple item filler to Everyone dent using a squeegee or spatula. Construct confident the dent is completely entire and no longer visible. Direct the filler on the sanded areas.
Spray the repaired area with a thick coat of primer. Hold the can six to eight inches from the surface and spray left to right, covering all of the filler to protect it from moisture. Let the primer dry for 30 minutes.
5. Sand the primer with the sanding block and 400 grit sandpaper to smooth it out and prepare it to be painted. The area can remain with smoothed primer until you paint it or have a professional paint the repaired dent.