Disinfected a corroded automobile battery with Coke.
Corrosion on a battery is a headache that usually occurs with older batteries. The battery fluid leaks away causing the metal to fuse with other parts of the battery. This is a difficulty when the battery needs grind or replacement. There is no desideratum to part the motorcar to a mechanic to establish this complication. A incomplex thought of Coca Cola Testament remove most battery corrosion.
Instructions
1. Disconnect the battery cables whether likely before creation. Remove the balky side fundamental, then the assured side. Whether you remove the positive side early, then you may purchase shocked as the now remains connected to the machine. Tie back both cables so they are elsewhere of the path. This prevents them from Stirring elsewhere of assign and accidentally touching the battery causing electric shock. Whether you can't remove the cables being of corrosion, then pour a dwarf dimensions of Coke all over the connexion points, fascinating consternation not to touch any part of the battery. Once the Coke has eaten the corrosion, then you can remove the cables.
2. Pour a small amount of Coca Cola over any corroded areas slowly. Add more Coke later if you need to increase the corrosion power. Wait for the Coke to bubble and eat away at the rust and corrosion. Wait for the Coke to stop bubbling before you move on to the next step. This should take about a minute. Pour some Coke over the battery connectors themselves if there is any corrosion present on them.
3. Take the wire brush and brush away any corrosion that is stuck around any bolts or in any other area. The brush provides additional corrosion-fighting power and can sometimes allow the Coca Cola to arrive places that it might not naturally reach. Continue to brush the corroded areas until they start to look clean.
4.5. Replace the battery cables starting with the positive side, then the negative side. The negative side will spark as it is connected.
Wipe the corroded areas with a paper towel to remove the Coca Cola and corrosion. Pour a small amount of water over the corroded areas to rinse away the sticky soda and rusty materials. Make sure to dry the water completely with the paper towels or you may encourage future corrosion. This is not a problem, and shows that the connection is complete. Close the hood of the car and turn on the engine to make sure everything is working properly.
