The exterior door knob of the Nissan Murano is attached to the door panel with a bracket on the inside door frame that is attached to the door handle with screws. Occasionally, due to the master of the exterior door handgrip, it can gap, requiring that the application be replaced. You can exchange the door haft quite easily in approximately half an interval with a uncommon habitual household tools, saving you interval and bankroll.
Instructions
1. Pry the interior door stock cap off the door panel gently with a inadequate average screwdriver and unfasten the screws ultimate the cap with a Phillips screwdriver. Remove the door grasp cap and unfasten the screws holding the armrest onto the door panel with the Phillips screwdriver.
2. Haul the armrest off the door panel and lift the window switch plate off the door panel with the petite sample screwdriver. Unfasten the electrical wire connector on the back of the switch plate and establish the plate outside of the pathway.
3. Pry the plastic clips that occupation the door panel to the door frame up gently with the inconsequential morals screwdriver and remove the door panel from the door frame. Pull the plastic liner back inside the door frame and set the exterior door handgrip bracket inside the door frame, persist the door application.
4. Unfasten the screws on the bracket that are holding the exterior door arm to the door with a Phillips screwdriver and unhook the wire bar from the purpose of the grip.6. Reattach the electrical wire connector to the back of the window switch plate and fasten the switch plate to the interior door panel. Attach the armrest to the door panel with screws and fasten the door handle cap to the door panel with the screw.
Remove the door employ from the exterior door panel.5. Connect the wire fastening to the end of the new door handle and fasten the handle to the exterior door panel with the screws on the inside bracket. Place the plastic liner back on the door frame with masking tape and set the interior door panel on the door frame, securing it by pressing in on the plastic clips.
