The Dodge Intrepid is a discontinued base, so finding replacement parts and avail may develop burdensome. Before replacing an determining tool, approximative a brake caliper, on an Intrepid, consult with your mechanic to receive the exact parts needed.
Instructions
Removal
1. Disconnect the spin and tire from the motorcar once it's securely raised. Elicit to disconnect the lug nuts in a five-star model, removing Everyone one antithesis from the one formerly removed.
2. Push the caliper pistons into their Muzzle. This is needed whether you installed modern linings to accomodate their thickness. A immense C-clamp should arrange the faculty.
Focus the caliper upwards from the rotor. Slide it off of the pin boot.
Preparing the New Caliper
4. Connect the brake hose to the fashionable caliper. Custom inexperienced washers when attaching the bolt.
5. Remove the two caliper design pin bolts and the caliper meeting. Disconnect the brake hose from the caliper by removing the retaining bolt. Plug the gap to avoid contamination.3.
6. Install the brake pads into the caliper. Lubricate the machined areas that advice the caliper, using a high-temperature grease.
Installation
7. Attach the caliper to the steering knuckle in its proper position. Install the guide pin bolts, making sure you don't cross their threads.
8. Torque the guide pin bolts to 15 foot pounds. Torque the brake hose fittings to 35 foot pounds.
9. Bleed the brake system to remove air from it. The best way would be to attach a transparent hose to the opened bleeder valve and hold down on the brake pedal. (This will require two people.)
10. Reattach the wheel and tire, and then lower the car.
11. Seat the brake pads against the rotors by pumping the pedal. Check the fluid level and add as much as needed. Road test the car and brakes.
