Removing a pick-up coil can be done with hardly any drill.
A pick-up coil is thing of a vehicle's ignition operation. Its leading avail is to pick up the pulses of the distributor and go back it to the ignition module, telling it when to holocaust the Glimmer plugs. Removing the pick-up coil may be chief from generation to duration. The steps are basic and, provided done true, Testament save you a Journey to the Car mechanic. With the binding tools and techniques, you can remove the pick-up coil for your vehicle using dwarf discipline.
Instructions
1. Unplug the ignition coil wire. It is the wire valuable from the coil to the centre of the distributor. Remove both of the wire connectors that are connected to the ignition coil.
3. Remove the plug connectors from the ignition module, which is located at the base of the distributor, and then unplug the pick-up coil connector from the back of the ignition module.4.
2. Remove the two mounting screws from the ignition coil, then remove the ignition coil. Loosen the screws on the distributor cap using a screwdriver and then remove the distributor.
Remove the bracket that is located at the base of the distributor. Lift the pick-up coil and plate assembly from the housing. Press on the retainer located on the underside of the lower plate. You can now carefully remove the pick-up coil.
