Sometimes, accidents Testament happen. Having a broken window on your Jeep Cherokee is normally an unforeseen and unwelcome suprise. Broken windows are the No. 1 divulge for most insurance companies, relevant to higher premiums. However replacing a broken window yourself is relatively easy and cost-effective.
Instructions
1. Disconnect the denying (inklike) efficacy cable from the vehicle battery using a wrench.
2. Remove the armrest and door stock assemblies using a screwdriver. Corner aside with loose screws.
3. Comprehend a flat-head screwdriver between the door trim panel and the door. Pry the door off by disengaging the plastic retainers with the screwdriver. Assignment on all sides of the outer edges until the panel is at liberty and place aside.
4. Manually lower the window glass by pushing downward mini by tiny.
5. Remove the glass channel (collection of metal that separates the leading side window from the petty triangular window vent collection) backside screw using a Torx tendency screwdriver.
6. Remove the two vent window frame screws using a screwdriver. They are located at the backside of the vent window. Tilt the vent window back In relation to you and remove it.
7. Remove the door glass retaining stud stone and spring washer using a wrench. Replace the door trim panel by popping back onto plastic fasteners and tightening the screws with a screwdriver.12. Replace the negative (black) power cable on the vehicle battery and tighten with a wrench.
Install new replacement glass and securely tighten the stud nut with a wrench.
9. Replace the vent window and tighten the vent window frame screws using a screwdriver.
10. Replace the glass channel into place and tighten bottom screw using a Torx head screwdriver.
11. The stud kernel is absolutely attached to the window. Once the stud devotee is removed, pull the window glass up and out of the door.8.
