Adding a gel contain to your motorcycle seat can fabricate your coerce also comfortable.
Far-off motorcycle rides oftentimes crop in saddle discomfort. Jamie Elvidge, in the Feb 1999 edition of "Motorcycle Cruiser" Periodical, says, "Butt ache is a popular dilemma among motorcyclists. In any die it can stretch debilitation levels and override the expanded pleasurable sensations of riding." To location seat discomfort, motorcyclists sometimes install gel pads on seats, however how chipper they drudgery varies from male to mortal.
Instructions
1. Select the seat off the motorcycle. End the seat cover and the seat pan with chalk to assemble it easier to settle the seat cover back on.
2. Receive the subsume off the seat using the Hairpin puller or pliers to remove the staples. Whether your seat is one quota and includes a passenger reduce, you can leave the cover attached at the rear of the seat pan, but pull it back completely out of the way of the driver's section.
3. Place the gel pad on the seat and trace around it with the chalk. Cut around the outline with the utility knife to a depth equal to the depth of the gel pad.
4. Put the modified seat back on the motorcycle.
7. Reinstall the seat cover using the electric stapler to attach it to the seat pan.
8. Sand down the stock foam inside the border you've cut. Apply light pressure when sanding to avoid removing too much foam.5. Apply adhesive to the bottom and sides of the gel pad and place the pad into the area you've sanded.6. Measure and cut the open-cell foam to a size to cover the entire seat. Apply adhesive to the foam and secure it to the seat.
