Check to make sure a safe clearance remains between the brake pedal and the clutch and gas pedals before driving the car.
1. Disclosed the box that contains the latest pedals and verify all of the parts are included. Constitute firm the branch is the genuine imitation for the machine you install them on. Brake pedals vary substantially from vehivle to car and customizing packages only work with specific models.
2. Remove the original rubber stops from the brake pedal by sliding a standard screwdriver under the rubber and peeling them off. Cut or break off the rivets on riveted brake pedal assemblies. Use snips behind the pedal to break the rivet before peeling the rubber back to expose the metal plate.
3. Place the new brake pedal over the metal brake platform and mark the bolt guides carefully. Drill the bold holes using the drill size recommended by the manufacturer. Match the drill angle to the sweep of the brake pedal in order to keep the hole straight.
4. Screw the new brake pedal into place without fully tightening the bolts. Tighten one bolt down and make any fitting adjustments before tightening remainder of the bolts.
5. Use side-to-side pressure to test that the cover is firmly in place and remains centered.
Customizing a machine to the inspect and performance constant the owner wants takes bit and skill. Finishing the billet with dwarf touches cherish a performance brake pedal gives the vehivle a completed double o and fondle. Picking the condign pedal is the healthy detail, installing a custom brake pedal is expeditive and evident.Instructions
