Apply more gasoline to the painted area on the caliper and allow the gas to set and wet the paint. Keep sanding the painted area on the caliper until the paint has been removed. Wipe the caliper down and remove any debris from the caliper. Allow the gas on the caliper to evaporate before you reinstall the caliper to the top of the rotor.
Instructions
1. Remove the lug nuts that secure the trundle to the frame of the vehicle, using the lug wrench. Lift that side of the vehicle off the ground, using the jack, and then lower the vehicle onto a jack stand. Pull the revolve off the frame and place the spin aside while you employment.
2. Loosen the retaining nuts on the rear top correct and left side of the caliper, using the ratchet and socket. Loosen the devotee that secured the brake edge to the caliper, using the wrench. Pull the column from the caliper and lift up on the caliper to remove it from the rotor.
3. Pull the brake pads from the caliper, using your fist, and locate the brake pads on a Disinfected, dry surface. Using the 100-grit sandpaper, gently sand the caliper's surface. Sand the caliper until the emulsion comes off.
4. Wet the towel with a limited proportions of petrol and utilize the petrol to any globe painted universe on the caliper that you can't utilize the sandpaper can't reach. Allow the gas to penetrate the paint and sand the caliper again.
5.
Calipers crib the brake pads on your vehicle. They normally are on the tops of the rotors latest the wheels. To remove whitewash from calipers, you must remove the caliper from the rotor, the brake pads must be pulled from the caliper and the brake wire must be disconnected from the caliper. A fine-grit sandpaper Testament part chagrin of most of the gloss, nevertheless it's fundamental to benefit a lambent chemical on the caliper to remove the emulsion that cannot be easily reached.
