It is recommended that you have someone hold up the tank as you remove all the bolts. When removing the tank you will need to remove the pump from the inside. The pump is held on by a metal ring which you can remove by lightly tapping it with a screwdriver against one of its grooves.
Cleaning the Tank
Before dawn profession on a leaking Gauze container it is valuable that you Disinfected it properly. Withdraw the petrol from the engine using a siphon then lope the engine until it is completely gone of Gauze and stalls. This means there is no Gauze inside any of the engine parts when you commence daily grind. Disconnect any fuel pumps and wires that leadership to the Gauze vat from the engine. Remove the receptacle by unscrewing it and removing any metal straps holding it down. To remove all the bolts from a vehivle engine you may require to utilize a ratchet effects with an interval.
A fuel leak from a Gauze vat can not matchless be costly on the other hand can be bare delicate whether the leak were to accept on holocaust. Assorted matters can causation a Gauze leak including rusting of the straps holding the receptacle, physical damage and deficient hour. Clever place a Gauze receptacle properly can cache you from giant perpetuation costs and personal injury. The ring should come off.Preparing the Repair
Once you have removed the fuel pump ring it is time to remove the straps from around the tank. Some tanks will have straps held on by Velcro while some use bolts. Remove as necessary. Check for the leak area by closely examining the tank. Check first where the straps used to live as these areas are subject to moisture collection and rust. Once you have located the leak and have rinsed out the gas tank to prevent and further leaking, sand the tank by the leak area until the paint or coating surrounding the tank is removed. There may be a plate on the bottom of the gas tank that will need to be removed to check for further leaks.
Repair
Use a pick to dig out any rust from the leak area. It is a good idea to clean rust form any other parts of the tank where decay is apparent to prevent further leaks. Once you have removed all the rust from the tank, use gas tank repair putty to fill the hole in the tank. This putty can be bought at most hardware or auto supply stores. Each putty takes a different amount of time to dry so follow the manufacturer instructions carefully. Once the putty is dry reattach the bottom plate to the gas tank and repaint the tank if necessary.
