2. Expose the fuel sending unit. The sending unit is located in the top of your vehicle's fuel cistern. You can access the fuel sending unit wound up an opening under the rear seat. It much contains a fuel sending unit that uses a float mechanism to relay fuel equivalent hookup to a gauge in the sprint. These floats are designed to extreme a vehicle's existence. In spite of the arrangement and the manufacturer's culminating cause, the floats act sometimes wear gone and exigency replacing.
Instructions
1. Disconnect the vehicle's battery. Remove the con side battery cable by loosening the retaining bolt with a wrench and twisting the cable freebie with your labourer.
Your vehicle is a latest age marvel of technology and mechanics. Most machine parts hold been drastically redesigned owing to the days of Henry Ford's Design T. The vehicle fuel container has remained relatively unchanged, though. Remove the rear seat backside by pushing the seat down and In relation to the rear of the vehicle. You Testament semblance the seat track pop for free of the mount
3. Pull the seat up and outside of the vehicle and sit it to the side. Remove the access opening incorporate by pulling the carpeting back to expose the vehicle floor. Remove the retaining screws with a screwdriver. Remove the insert and allot it aside. You Testament examine the fuel receptacle sending unit retainer on the top of the fuel cistern.
4. Remove the sending unit. Unplug the wiring harness from the connection on the sending unit and set it to the side. Remove the bolts on the sending unit with a wrench. If the vehicle is equipped with a screw-on type retainer, place a screwdriver into one of the slots in the retaining ring and strike gently with a hammer in a counterclockwise direction. When loose, remove the sending unit from the tank. The float is connected to a long wire-like lever, requiring you to snake the unit out of the tank at angles.
5. Replace the sending unit. Slide the new sending unit into the tank. You may need to snake it into the tank at differing angles until it is completely in place. Reassemble in the reverse order.
