Upgrade out of date analog gauges by replacing them with digital ones.
The Pontiac Fiero sports performance vehicle was manufactured from 1984 to 1988 production the automobile aggrandized than two decades dated. Firm features of the sports automobile can be upgraded cheaply and easily Homewards to dish out the vehicle a expanded present glad eye. The inventory analog gauges inside the Fiero are antiquated and not as precise as their digital counterparts. Transform the analog gauges in your Pontiac Fiero for a advanced beholding and exceeding accurate readings.
Disconnect the wiring harness holding the instrument panel to the car by undoing the clip with your fingers.6. Position the new digital gauge instrument panel into place. Attach its wires to the wiring harness by pushing the assembly into the harness until it clicks.
2. Application a Phillips-head screwdriver to remove two retaining screws on the Swarm trim panel extreme the steering circle. The screws are located on the backside left and backside licence of the cluster trim panel.
3. Application the apropos socket wrench to remove two retaining bolts at the top left and top right of the cluster trim panel. Remove two more retaining bolts underneath the steering column holding the kick panel in place.
4. Remove the cluster cover panel and kick panel with your fingers. You may have to remove the cluster cover panel from the clips by hand.
5. Remove the instrument panel using the screwdriver and the appropriate socket wrench.
Instructions
1. Prop administer the hood and disconnect the counteractive battery terminal cable inside the engine compartment. Establish it aside where it Testament not touch the battery terminal.7. Replace the cluster trim panel and kick panel. Use the socket wrench to install the bolts, then the Phillips-head screwdriver to install the screws.
8. Reconnect the battery terminal, start the car and test the new gauges.
