2. Remove the door panel with a Phillips screwdriver. Consult a vehicle repair instruction for particular locations. Unhook the clips that Celebrate the door panel on the door frame with a plastic pry baggage.
Fixing the authority window is a agnate operation no episode which type of vehicle you may own. The particular discongruity may be in the vastness of the tools needed to remove bolts and screws.
Instructions
1. Evaluation the other force windows in your vehicle. Whether the other windows are not going up or down, the holy mess may be a fuse, not a Engine. Provided the others are working worthy, it is not a fuse dispute. Provided they are not, consult the repair jotter for the particular residence of your capability window fuse, remove it and convert it with a fashionable one. Remove the opposite battery cable from the negative battery terminal and berth it so that it cannot touch metal and intention a short in the vehicle's electrical transaction.
Stuck dynamism windows can be inconvenient.The invention of endowment windows imaginary drive-through quickly cooking, drive-through banking and toll booths credible. We don't fancy anything approximately these windows until something goes false. We can no longer account those convenient drive-through centres for banking or a burger unless we compass extension to extended the front machine door. Lift up on the door panel and disconnect the electrical wiring for the authority locks and windows. These Testament be clipped to the door panel and its Engine. Remove the plastic insulator using the snaps that secure it to the door frame.3. Remove the door module with the screwdriver. The wires you removed earlier lead to this door module box. Leave that portion of the wires connected to the box.
4. Unbolt the window regulator, located in the center part of the door frame, with a ratchet or crescent wrench. Remove the bolts securing that portion of the door onto the frame. There may be as many as six bolts, so consult your manual for specifics. Remove the regulator and ease the window out of the clips in the regulator.
5. Inspect the window channels to make sure they don't interfere with the motion of the power windows. Spray some silicone lubricant into the window channels.
6. Reconnect the negative battery cable and test the window control panel. Insert a test light tool into the electrical connector and reconnect the window switch panel to the "Up" control on your door. If the test light tool lights up, the signal is making it from the button to the connector. Your problem is likely the window motor. Disconnect the negative battery cable again.
7. Remove the window motor from the door frame and replace with a new one. Remove the motor with a socket of appropriate size or a wrench. Reassemble the door panel including the insulator, and all other pieces, in the reverse order you removed them in. Reconnect the electrical plugs and replace the hidden screws. Reconnect the negative battery cable again and test the window.
