The exhaust manifold is normally the latest apportionment under the hood to receive any care. On rear wheel drive vehicles, the exhaust manifolds are on Everyone side of the engine, normally concealed by other parts. On front spin ride engines, the exhaust manifold is front and centre when the hood is opened. Over epoch, exhaust manifolds incline brown and blacken looking. Drink in dye an exhaust manifold so your engine bay looks Disinfected and rare.
Instructions
1. Wash the exhaust manifold with a sponge and diluted dish cleanser. Compose confident the engine is algid, then pour the diluted liquid on the manifold and scrub it with a sponge. Rinse until there are no suds running off of it. Acquiesce everything to dry completely. Starting the engine Testament dry it fast, but make sure the engine cools down again before beginning to paint.
2. Place masking paper and tape around any areas that you don't want painted. Allow the paint to dry completely before starting the engine.
One thick coat or two thin coats are sufficient for helping the paint stick to the manifold.
4. Spray two or three coats of the high heat engine paint onto the exhaust manifold, making sure each coat goes on evenly. Remove the masking tape and paper once the last coat is sprayed on. Most of the overspray will wear off, but it's best to avoid it altogether.3. Use the engine primer to spray a thick coat onto the manifold.
