Remove a Catalytic Converter From a Muffler
Dilatory mould cars and trucks must be equipped with emission state systems that eliminate a quantity of the pollutants from the tailpipe of every vehicle in cause nowadays. The catalytic converter is the leading Element in the exhaust action and its venture is to remove carbon dioxide from the exhaust gases career produced in the combustion chambers of an engine. Use a socket and a wrench to loosen the fasteners that secure the exhaust flanges in place. The flanges have two bolts that keep them secured together with a gasket in between. Remove the two bolts from the exhaust pipe that hold the flange end to the catalytic converter.
1. Lift the vehicle far enough off the ground to access the exhaust system under the vehicle. The vehicle should be supported securely by jack stands or a vehicle lift. Locate the catalytic converter(s) that are a part of the muffler and exhaust system. Remove a catalytic converter from a muffler by accessing the flanges that come with most converters and exhausts. Or you must cut the converter out with a saw or cutting torch. For flange-type converters, use the proper wrench or socket to begin removing the component(s).
2. Abundant with honeycombs coated with a combination of precious and non-precious metals, exhaust Gauze interacts with the metal coating and a reaction changes the molecular constitution of the carbon dioxide. Remove a catalytic converter from a muffler system when an old one becomes clogged. Not only does the converter not convert carbon dioxide gases in this condition, it reduces the amount of gas that can be passed through the exhaust system causing engine delays and operational issues as well.
Instructions
Pry the two pieces apart with a screwdriver. Tap on the connection with a hammer if the pipes refuse to come apart. Repeat the process for both ends of the converter to free it from the exhaust and muffler.3. Clean the flange ends of both exhaust pipe openings. With the converter removed, insert another piece of pipe or new converter to replace the missing exhaust pieces. To straight weld a piece of pipe directly into the system, cut both flanges off the pipe ends and weld them together completely. Any leaks in the weld will result in a loss of horsepower and polluting gases will escape.
4. Replace the removed catalytic converter with a matching one by cleaning the all flange ends with a wire brush. Insert a flange gasket in between the flange ends of the exhaust pipes and the converter. Tighten both flange bolts evenly to create a leak-free seal. Secure both ends of the new converter into place. Check for leaks after starting the vehicle.
5. Recycle catalytic converters for the precious metals inside. Platinum is used as the material that makes the converter work as an emission reduction tool. The interaction of gas and metal produces a molecular change in carbon dioxide which reduces the amount of harmful gases emitted from a combustion engine. The catalytic converter can be recycled at a scrap metal yard or auto mechanic to recoup some of the cost of the new converter or pay for the time it took to get the converter out for good.
