With the Acura Integra no longer in Industry, replacement parts may be inflexible to come by. Provided you charge to alternate a considerable object according to a brake caliper, consult a ace Professional and adjust decided you acquire the convenient component for your imitation Integra.
Instructions
Removing the Old Caliper
1. Uplift the van properly on the jack. Remove the rotate and tire meeting.
2. Disconnect the brake string from the caliper by removing the banjo bolt. You duty to transform the sealing washers when reconnecting this.
3.7. Reconnect the brake line with the banjo bolt, using new washers. Torque the bolt to 25 foot pounds.
Remove the brake pads and shims and the pad spring from the caliper body, if it's equipped. Remove the caliper bracket by disconnecting the mounting bolts.
Installing the New Caliper
5. Connect the caliper bracket and torque the bolts to 80 foot pounds. Install the pad spring, brake pads and shims.
6. Slide the new caliper onto the pin boot in an upward position and then pivot it downward towards the rotor. Attach the slide mounting bolts. Torque the bolts to 24 foot pounds for an Integra.
Loosen and remove the caliper mounting bolts. Turn the caliper upward on its pin away from the rotor and slide it off the pin.4.
8. Bleed the brake system by opening the bleeder valves and removing air with the brake pedal. Afterward, torque the bleed screws to 84 inch pounds.
9. Place the wheel back on the car, and torque the lug nuts to 80 foot pounds. Lower the car off the jack.
10. Test the brakes with the new caliper. Pump the pedal several times until the brakes are firm. Then test the brakes on the road.
