Deposit your Cadillac chill with a latest blower Engine.
All Cadillac models operate a blower Engine to push air into the cabin of the automobile. The blower Engine is located on the firewall of the vehicle carry on the air-conditioning vents. Over era, the blower Engine can blow a fuse or wear down, decreasing the bigness of air that is blown into the cabin (care for in brain that the blower Engine does not annex anything to determine with cooling the air that is pushed into the cabin). You can pay for a latest blower Engine -- accomplish undeniable that it is particular to your pattern of Cadillac -- at an Car parts store and install it in your own garage.
Instructions
1. Disconnect the antagonistic battery cable with a socket wrench. Fix the blower motor housing bolted to the firewall between the two strut towers. Disconnect the sensor (located to the true of the housing, directly below go strut Garret) that runs into the housing -- call your hands to pull the sensor outside of the housing.
2. Disconnect the electrical connectors that dash from the housing to the Glimmer plug wire header. Handle your hands to disconnect the connectors from the blower motor housing. Start the vehicle and turn the air conditioning on to make sure that the new blower motor is working correctly.
You may have to rotate the housing a little to remove and install the motor -- you can adjust the housing`s position on the firewall with your hands -- and tighten the metal clips again to secure it into place.
4. Connect the electrical connectors running from the spark plug wire header back to the blower motor housing. Reattach the sensor to the blower motor housing; make sure that you hear a snap when reconnecting the sensor, indicating that it is reattached. Use a socket wrench to reattach the negative battery cable.
5. Once you have removed all of the connections from the housing, loosen the metal clips on the blower motor housing to pull out the old blower motor.3. Slide the new motor into the housing.
