Replacing the starter in your 1994 Hyundai is a relatively Unceremoniously activity that a novice Car mechanic can engage in.
Provided you turn the indispensable in your 1994 Hyundai and the vehivle won't bow, then you may be looking at replacing the starter. There are a couple of contradistinct ways to distinguish for undeniable provided the starter is the occupation. Provided you essay to bob your van, however it all the more Testament not inception, then that is an indicator that your battery is not the puzzle. Whether you hear the starter rotate and click, however the engine doesn't turn over, then that is another comment that your starter is damaging and needs replacement.
Instructions
1. Allot the starter in the engine compartment. In that Hyundai imaginary distinct differential models in 1994, the starter can be located in changed places depending on the engine in your machine. For instance, the starter for a Hyundai Scoupe is located subservient the intake manifold near the firewall. The starter in the 1994 Hyundai Sonata is located on the backside of the engine, between the engine and transmission separation contour, ethical above the coerce axle. The starter is approximately half the vastness of a football and has two cylindrical metal pieces, one of which is worthier than the other.
2. Ride your automobile onto ramps or applicability a floor jack and jack stands whether your starter is located underneath the engine and needs to be accessed from below. Provided the starter is below the intake manifold or can be accessed away from the top of the engine, then you complete not devoir to uplift the machine.
3. Disconnect the negative battery terminal cable from your 1994 Hyundai. Do not touch any other parts of the engine for 15 minutes, after disconnecting the battery cable, as you can still risk an electric shock with the residual charge buildup in your electrical system. Also avoid contact with the engine's cooling fan, which can be turned on automatically, even when the car is turned off.
Tighten the bolts on the new starter and reconnect the electrical tabs.7. Reconnect the battery cable and turn your car on. If it still does not crank, then you may not have proper alignment between the flywheel and the starter.
Starters usually have two bolts that connect them to the flywheel; however, some models have three bolts. Yours may differ depending on which type of engine you have in your 1994 Hyundai. Set the bolts aside.
6. Slide the starter from the flywheel connection and replace it with the new starter. Keep your old starter and return it to the parts store where you purchased your replacement for a refund on the starter's core.4. Disconnect the electrical connection tab that leads from the starter to the electrical system.5. Use a socket or torque wrench to unscrew the bolts connecting the starter to the engine.
Remove the battery cable, unbolt the starter and reinsert it.
8. Reconnect any other parts that were taken off to access the starter, such as the intake manifold assembly for the 1994 Hyundai Scoupe.
9. Drive the car off the ramp or lower it with the floor jack, then take your 1994 Hyundai out for a test-drive.
