Instructions
1. Unlatched the Mustang's Chauffeur's side door and spread along the backside of the console under the steering shove to bonanza the hood Proceeds. Pull the release to pop the hood.The Ford Mustang has one of the largest sets of aftermarket parts available for any motorcar replica. One of the most requested aftermarket parts is the Mustang hood. A array of hood types are available for the Mustang (of decent approximately all example dotage) and conversant install a Mustang hood once you decide on the type you Testament cause is critical. Happily, the course of installing a hood on a Mustang is quite elementary and can be accomplished by any native mechanic.
2. Lift the hood and find the hood latches located on either side of the hood near the windshield. Use the socket wrenches to remove the mounting bolts holding the hood to the latches.
3. Have your helper assist in lifting the hood free from the car and set it aside. Place the new hood on top of the engine compartment and line up the mounting holes on the hood with the mounting holes on the hood hinges.
4. Reinstall the hood mounting bolts and tighten them down with the socket wrench. Close the hood, making sure it latches properly.
