Tuesday, December 29, 2015

Install Compression Fixtures On Steel Brake Lines

Stainless steel brake lines wish compression fittings.


Steel brake lines are designed to withstand far greater pressure levels than normal rubber brake lines. When you jam on the brakes in a car with normal rubber brake lines, the response can be soft and pressure can be lost as the line stretches in response to the force within.2. Unravel about 1/2-inch of the stainless steel braiding at the cut end creating a small cone shape. Place the ferrule or brass ring over the rubber portion of the brake line but under the feathered stainless braids.3.


Instructions


1. Cut your stainless steel brake lines to the required length using a metal snips to cut the steel braids and a razor blade to cut the inner rubber tubing. Place the compression-fitting cap over the metal braids without removing or altering them in any way. Twist it onto the line making sure to leave the threaded portion of the cap facing outward. Slide the compression cap down the brake line away from the cut end.


With stainless steel lines, the extra pressure is directed towards the calipers instead of being lost on the way. In addition to better braking response, stainless steel lines will also provide a firmer feeling brake pedal. Attaching steel brake lines will require you to install compression fittings.


Slide the third and last piece of the compression fitting onto the brake line, through the brass ferrule and into the rubber line firmly. Bring the compression cap up and over the other two components and tighten the threads to create one solid compression fitting. Do not allow any metal braids to get into the threads.