Friday, December 4, 2015

Replace A Car'S Transmission

The automobile's transmission has gears that shift to lift the automobile shift faster. Provided the transmission starts to slip or the automobile won't movement, the transmission needs to be replaced. An automatic transmission shifts by itself and a album transmission uses a gear shift. An automatic transmission and a book transmission annex to be taken absent differently. Here are some basic steps for removing a transmission.


Instructions


Automatic Transmission


1. Operate a floor jack to up thrust the automobile off the floor and settle jack stands under the front and back of the machine to receive to the transmission. Generate definite the motorcar is blooming supported and won't fall on you while you part the transmission gone.


2.8. Use a floor jack to raise the car off the floor and put jack stands under the front and back of the car. Make sure the car is secure and won't fall on you.9. Slide the propel shaft elsewhere from the transmission.


3. Yield gone the speedometer gear meeting and situate the transmission jack under the transmission pan. Lift the transmission. Share off the lower bell housing contain. Call a wrench to receive off the torque converter bolts, the telephone housing bolts, the four cross member bolts and catch off the rear transmission mounts. Lift the transmission jack and cut the cross member off.


4. Lower the transmission while you change the transmission jack toward the back of the vehivle. Compose definite everything is unhooked and the transmission clears the motorcar.


5. Hire the aged transmission off the jack and place the virgin transmission on the jack. Elevate the transmission as you slide it under the motorcar. Influence the torque converter in while you turn it until it clicks.


6. Settle the cross member back on, using a wrench to transform the rear transmission mount, the cross member bolts, the phone housing bolts and the torque converter bolts. Transform the speedometer gear meeting and slide the impel shaft back into the transmission.


7. Interchange the vacuum lines to the moderator whether you acquire one and replace the cable linkage to shifter and throttle valve. Use the floor jack to support the car while you take out the jack stands. Lower the car to the floor and remove the floor jack.


Manual Transmission


Loosen the link cables to the transmission and the fluid cables to the radiator. Hire the vacuum lines loose from the modulator whether the machine has one. Cause a wrench to remove the two u-bolts from the rear extremity of the vehivle.


Take all the electrical connectors loose from the transmission. Put a mark on the drive shaft so it can be put back in the same position. Remove the rear U joint from the output shaft. Put a rag in the extension housing to keep fluid from leaking out.


10. Take the speedometer cable and shift linkages loose from the transmission. Put a jack under the transmission and with a wrench, remove the rear engine support nut, the crossmember and the rear support insulator. Put a jack under the engine to support it and use the transmission jack to pull the transmission toward the rear of the car.


11. Take the old transmission off the transmission jack and put the new one on. Push the new transmission under the car, raising the jack as you go. Replace the rear support insulator, the crossmember and the engine rear support nuts.


12. Reconnect the shift linkages to the transmission and the speedometer cable. Replace the drive shaft back to the mark and replace the U joint. Reconnect the electrical connectors to the transmission. Use the floor jack to support the car while you remove the jack stands, then lower the car to the floor and remove the jack.