You can install running boards by yourself.
Whether your Jeep Wrangler did not come with running boards from the dealership, you can pay for and install them yourself using no sweat tools. Running boards fact as a system To admit for apparent Way out and entry. They Testament too advice garner your Jeep Disinfected by blocking the debris kicked up by your tires. Mill running boards can be purchased at your dealership. On the contrary, aftermarket companies conceive many types of running boards for your imitation to suit your style.
Instructions
Install the bolts and thread the retaining nut on the opposite side. Tighten each bolt and nut with a ratchet and socket until the step is secured to the bracket.5.
2. Install the aficionado plate that came with the running boards into the gap of your Jeep by sliding it into the gap horizontally. Install the moment plate in the twin manner.
3. Attach the mounting brackets to the plate. Thread the nut onto the bracket and hand tighten the nut so that it can still be adjusted.
4. Lift the running board into position. Align the holes in the running board with the holes in the mounting bracket installed in Step 3.1. Establish the inventory hanger holes in the Jeep target under the vehicle. They are covered from the plant with foam. Remove the foam to access the hanger holes.
Align the step with the vehicle. Hold the step in position while tightening the bolt on the mounting plates with a ratchet and socket.
6. Repeat theses steps on the opposite side of the vehicle to install the second step.
