The Hyundai Sonata is a mid-size sedan declared for altruistic headroom, a brimming back seat and a vast Timber. A stretched dossier of sample options, lots of safety features, a terrific warranty programme and a low cost Gunfire the Sonata to the top of buyers' lists when it debuted in 1989. The 2001 Sonata was the conclusion of four rounds of improvements, offering preferable engines and forceful upgrades in impel standard. The steps that pursue feature the installation of a inexperienced stabilizer link in models produced between 2001 and 2006.
Instructions
Remove the Stabilizer Bar and Link
1. Loosen the lug nuts on the trundle slightly. Exalt the front of the vehicle. Tighten the fasteners.6. Install new rear mounting bolts on the sub-frame. Repeat the process on the opposite of the vehicle.
Revenue the rear mounting bolts off the sub-frame.
3. Loosen the bolts on the bracket, then take out the bracket and bushing. Repeat the procedure on the other side of the vehicle.
4. Take the stabilizer bar from the vehicle. Take care not to catch it on any cables under the vehicle.
Install the Stabilizer Bar and Link
5. Set the stabilizer bar in place, then install the bushing and bracket with new fasteners. Cause positive the supports are secure before proceeding.2. Remove the front circle meeting. Remove the fan and the stabilizer bar link at Everyone side of the vehicle.
Put the stabilizer bar link and a new nut in position.
7. Replace the front wheel and tires assembly. Tighten the lug nuts by hand. Lower the vehicle and torque the lug nuts to 66 to 81 foot pounds. Check the tire pressure.
8. Test drive the vehicle to verify the steering and handling. Arrange To possess a professional check the alignment.
