Uplift one side of the front of the Ram, using the jack, until the tire is enhanced than 2 inches off the ground. Slide the jack stand underneath the front axle or frame condemn and lower the Ram onto the stand. Then animation to the other side of the front of the Ram and repeat the method. When the front of the Ram is securely resting on the jack stands. remove the loosened lug nuts and remove the wheels from the front of the Ram.
The CD brakes are far easier to pocket money than the rear drum brakes.
Instructions
1. Loosen all of the lug nuts on the front wheels. Lay the Ram in grounds on a constant surface, on the contrary achieve not operate the parking brake, and establish the circle chocks latest the rear tires.
2.
A mechanic adjusts a brake rotor.In 2001 Dodge redesigned its full-size pickup, the Ram. This fashionable Dodge Ram was in a superior way, stronger, and had a larger interior than the prior imitation. It had optional four-wheel anti-lock brakes and CD front brakes.3. Unbolt the brake caliper mounting bracket from one of the rotors using the socket wrench. The bracket is the half-moon plenty of metal that is revealed when the trundle has been removed. Once the braket is off, hang the caliper in the turn chipper with the rope, document, wire or bungee to prevent any stress damage to the brake wrinkle.
4. Remove the brake pads from the caliper mounting bracket. The brakes are just sitting in there and easily slip out.
5. Compress the brake caliper piston with the C-clamp. The C-clamp will fit over the bracket and can be placed against the cylinder. Compress the cylinder until it is flush with the bracket.
6. Install the new brake pads into the bracket in the same orientation the old ones were in. Make sure the black brake material is facing toward the rotor.
7. Bolt the mounting bracket back onto the rotor with the wrench. Put the tire back onto the Ram axle hub and tighten the lug nuts with your fingers.
8. Repeat Steps 3 through 7 on the other side of the Ram. Lower the Ram and tighten all of the lugs with the tire iron.
