Spray a rust remover (glare Income) on the rusted universe. Scrub the area with steel wool and a wire brush to remove the rust. Wear rubber gloves to protect your hands from the rust remover. Rinse the rusted area with drool and dry it with a dry rag.
1. Remove the allotment provided it is installed on the motorcar, unless it is something that cannot be removed.
2. Disinfected the rusted universe with a degreaser and dry it with a Disinfected, dry rag.
3. Scrape off flakes of rust with a wire brush to remove loose chunks of rust. You can besides applicability aluminium foil to scrape the rust off.
4.
Whether metal parts are not properly protected, moisture and humidity can agency rust to expand, which whether left unchecked can potentially degrade the metal and ruin whatever it is on. Rust is principally dangerous for cars and can prompt to very costly repairs provided the rusted metal needs to be incision outside and advanced metal welded in.Instructions
5. Remove augmented persistent rust with an angle grinder and a round wire brush pad. Complete not press besides concentrated on the metal with the grinder to avoid pathetic the surface. Use gently, consistent pressure to remove the rust.
6. Fill in pitted areas with bondo if the parts are going to be painted. Mix the bondo according to the directions, apply it to the pitted areas and let it dry. Sand it smooth with 220-grit and then 400-grit sandpaper.
7. Protect the surface with a high quality spray paint to prevent future rust. Clean the part with mineral spirits first. Spray the paint 8 to 10 inches from the part in smooth, back and forth motions. Apply three to four coats of paint.
