Plug the wire harness into the DVD player, and slide the unit onto the bracket. Push the unit back until it locks into place.
Instructions
1. Pry the overhead dome light from the ceiling of your F-150 using a slotted screwdriver. Select your day in creating time gently between the dome lustrous and the ceiling. Remove the dome illumination from the ceiling gap, and unplug wire harness. Tuck the wire harness up into the ceiling gap.
2. Clench the mounting bracket from the DVD mounting utensils against the ceiling over the gap. Remove the headliner on the ceiling of the automobile under the bracket so the bracket sits flush against the ceiling to intersect vibrations: Hint on all sides of the bracket cutting the headliner with a assistance frog sticker, then remove the bracket and discard the cut-out globe of headliner.
3. Pull the wire harness from the ceiling hole, and thread it terminated the centre opening in the bracket. Slide the bracket up the wires until the bracket lays flush against the ceiling in the residence from which you removed the headliner.
4. Authority the bracket against the ceiling, and drill a total of four holes, one in each corner, through the bracket into the ceiling using a drill equipped with a machine tap drill bit. (Do not drill through the ceiling.) Insert the mounting screws through the bracket holes, and tighten them into the ceiling with a Phillips screwdriver.Installing a Myron & Davis DVD player in a 2004 Ford F-150 is not as complicated or involved as it sounds. You can perform the work yourself rather than hiring a adept. This DVD player requires no supplementary wires to install in the vehicle; instead, you can bag the pre-installed wires from the overhead dome bright to competence the unit. The do-it-yourself development is a concern of completing a unit of slender tasks using usual household tools.
