The Mustang GT is nearly always equipped with a rear spoiler, unless it's a convertible pattern. Other Mustang models may or may not be equipped with a rear spoiler. Many owners remove the spoiler from their Mustang to streamline the glom of the vehicle. Whether you pleasure to remove the spoiler from your Mustang GT, you can complete so in less than 20 minutes, with usual tools that you probably already posses in your garage.
Instructions
1. This Testament sanction you to access the bolts that dominion the spoiler onto the Timber lid.3. Place the bolts that occupancy your spoiler onto the Timber lid. Mill Mustang GT spoilers are usually held on by four bolts.
Free the Timber lid To admit little access to the spoiler. This can be done using your Mustang's material, or by using the remote Timber Proceeds that is located inside the vehicle.2. Remove the trim pieces or plastic plugs on the interior of the Timber lid.
If your car is equipped with an aftermarket spoiler, the bolt setup may be different.
4. Remove the bolts from the spoiler using a metric socket. It is helpful to remove the bolts on the left and right sides first, and the center bolts last. This allows you to hold onto the spoiler as you loosen the bolts, and avoid damaging your Mustang's paint or rear window.
5. Remove the spoiler from the top of your Mustang's trunk lid. You may wish To possess a friend help you with this, to keep the spoiler from slipping and damaging your paint.
