Installing a window in your vehicle may seem comparable a scary proposition, however whether you admit a basic discerning of how the components within the door employment you should be able to plenary the assignment. Placing a window in your 1997 Honda Prelude is lovely corresponding evolution as putting a window in to any other vehicle. You can pick up a window for your Prelude from your district Car store.
Instructions
1. Practice a Apartment lodgings attitude screwdriver to carefully pry the door handle trim away from the door. Remove the screws attached to the door shaft with a phillips-head screwdriver. Pull the door handle absent from the door.
2. Carefully pry the door panel trim away from the panel using the Apartment lodgings intellect screwdriver. Pry the trim out from its clips and pull from the panel. Hire annoyance not to damage the trim or the panel itself. Remove the screws attached to the panel with a phillips-head screwdriver and pull the panel off the door.
4. Place the window in to the door frame. Line up the bolt holes on the window with those on the regulator. Attach two bolts through the holes using a wrench to secure them in place.
3. Lower the window regulator to its lowest point within the door frame. This will provide you with best access when installing the window.
5. Reattach the door panel and trim assembly by following the removal steps in reverse.
