Changing a bike tube is something that anyone can discharge. Grind it so that, whether you complete compass a Apartment lodgings on the pathway, you can place it and predispose riding again.
Instructions
Removing the Old Inner Tube
1. Remove the bike turn. Provided your bike is quite latest, it probably has a rapid Proceeds lever. Flip it disclosed and receipts the spin off.
2. Provided your bike has axle nuts holding the turn in corner, loosen them with a wrench and slide the shove off.
3. Whether you are removing the rear circle, carefully remove the coerce chain from the rear sprockets.
Use a tire iron as a lever to push remainder of the wheel on. Insert the end of it against the inside of the wheel, push against the tire, and gently slide it into the wheel.14. Slide the tire iron around the wheel, pushing the tire in.
6. Hook the freebie borderline of the tire iron around one of the spokes, prying the tire gone from the rim.
7. Slide another tire iron in beside the antecedent. Move it along the rim of the tire until it pops free of the wheel.
8. Remove the inner tube.
Installing the New Inner Tube.
9. Make sure the tire is properly set. One edge of it should still be inside the wheel, while the other edge should be out.
10. Put the new inner tube in, lining up the valve with the valve hole in the wheel. Remove any twists in the tube, and make sure it is sitting up against the tire.
11. Inflate the tube slightly, and make sure that it doesn't have any twists in it.
12. Try to receive the other edge of the wheel into place with your hands. Push as much as possible inside the rim of the wheel.
13.4. Once the circle is off, deflate the tire completely.5. Slide the round objective of a tire iron between the revolve and the tire.
15. Fully inflate the new tube.
16. Put the wheel back on.
