Bringing your motorcar to a collision repair shop can be costly and revenue indefinite days. On the contrary you an become able set a humble dent by yourself and dash off all the repairs you commitment in your own garage. There are various methods to effort when removing a dent.
Instructions
1. Wet the dent with soak and a immature vastness of dish abstergent. Press a household plunger into the dent to produce a suction. Gently pull the dent outside with the plunger, sliding the plunger to at odds areas of the dent. Slide the plunger down and outside of the bathe to gap the suction. Whether this does not repair the dent, action to the adjoining operation.
2. Remove all plastic and parts from ultimate the dented protest panel whether potential. End a thing hammer to gently tap the dent gone and into abode. Manipulate the hammer on both sides of the dented panel to still the damage gone. If this step does not work, move to the next step.
3. Use a grinder to grind the paint out of the dent. After allowing the paint to dry for an hour, spray three coats of clearcoat paint, waiting thirty minutes of time between coats. Wait at least one month before waxing the repaired area.
4. Wipe body filler on the damaged area with a plastic squeegee. Smooth it out and allow it to dry for an hour. Sand the filler smooth with 80 grit sandpaper and a dual action sander. A dual action sander can be used to reduce sanding time.
5. Spray two coats of primer on the damaged area and allow them to dry for thirty minutes. Spray three coats of paint on the area, waiting thirty minutes between each coat before spraying another. Drill several holes into the dent in various areas. Screw the tip of a dent puller into one hole and gently slide the handle away from the dent. Move the dent puller to different holes, alternating pulling in each hole. Use the body hammer to tap on any high points if you pull too hard with the puller.
