Replacing the alternator on a 1991 Acura Integra is not hard to accomplish. You can cause it in your driveway or garage, which resources that you can save income on high-reaching labour charges at a repair shop. The alternator supplies effectiveness to the Integra's electrical components, such as the lights and fuel pump. Without an alternator, your engine Testament not amble and the battery Testament bleed actual quickly whether you pop to provide capacity to everything without the servicing of an alternator.
Instructions
Turn the adjusting bolt on the alternator counterclockwise with a socket and ratchet to loosen the zone tension. Remove the belt from the alternator pulley. Remove the alternator mounting bolts with a socket and ratchet. Remove the alternator from the car. Disconnect the wires by removing the nuts with a wrench. Unplug the alternator voltage regulator.
2.1. Yawning the Acura's engine compartment. Disconnect the denying battery terminal by using a wrench to loosen the devotee and pulling it from the battery. Reputation the wires on the alternator with a marker and masking tape to indication the Correct purpose of Everyone one.
3. Put the new alternator on the mounting bracket and tighten the bolts with a socket and ratchet. Place the belt on the alternator pulley. Adjust the tension of the belt by turning the adjusting bolt clockwise with a socket and ratchet to tighten it up. Connect all the electrical wires and tighten the nuts with a wrench. Plug the voltage regulator into the alternator.
4. Connect the battery terminal and tighten the nut with the wrench. Start the car to test the alternator.
