Whether you want to set a defective window-tinting undertaking, your prospects of saving the existing tinting are grim. The dirt particles or air that caused the tinting to bubble are trapped between the window and the movie and can particular be removed by captivating off the tint. Here are some steps for fixing that pathetic tinting function.
Instructions
1. Phone a tinting competent for his or her view. This Testament price extinction, and he or she is going to clue in you that there are no solutions apart from beguiling off the existing film and starting over.
Go very slowly to avoid bubbling.
Remove the film. Using even pressure, carefully pull the film off the window. Try to receive it off the window in one piece.
4. Clean the window with a window cleaner. This is the most important step. Even the smallest particle of debris will cause the film to bubble again.
5. Wipe the window with a cloth towel. Carefully inspect the window for any traces of lint.
6. Measure the window. Take precise measurements of the window and carefully cut a new sheet of tinting.
7. Apply the tinting film. Carefully apply the new film with a firm, straight edge.2. Start at a corner of the tinting. Take a single-edged razor blade and carefully tease up enough of the tinting film to seize with your fingers.3.
