Repeat the previous steps for all door trim pieces. This occupation should catch you approximately an interval for all pieces.
Instructions
1. Frank the doors, and remove the screws that occupation the armrest and inside door lock and stem meeting calm.
2. Pry the inside door panel off the door with a trim Emigration stuff. Wedge the teeth of the belongings behind the door panel, and pry up (or away) on the panel. Most car door panels are held in place using only retaining clips. If your door has screws, they will be located on either ends of the door and must be removed.
3. Reach behind the door panel and squeeze the end of the pins with a pair of pliers. Squeeze the back of the pin and push it through the hole it sits in. At the same time, grab the door trim from the outside of the door (or have an assistant help you) so that the pin does not reset itself while you're working on the other pins.
4. Pull the door trim off the door.
5.
Removing the door trim from your automobile is compelling provided you are doing any affectionate of thing business on the vehicle. It's and requisite provided you gimmick on replacing the trim. Immature plastic pins grab onto the inside of the door panel on most cars to dominion the trim to the door. Consequently, removing these trim pieces leaves a border of holes in the door.
