Punctured tires seem to be an inevitable effects of bicycling. Experienced cyclists accomplish a habit of carrying the compelling repair materials on their bike at all times. With a petite preparation you'll never duty to concern approximately lifetime stranded. Demand much another safety and still of genius on the means? Training this repair Homewards.
Instructions
1. Remove the circle from the bicycle and the tire and inner tube from the rim, consequent the steps in Alter a Bicycle Tire, "Removing the ancient tire."
2. Examine the inner tube for holes by inflating it with a bicycle-tire pump until you can hear air escaping. Many holes are not visible until the tube is highly pressurized.
3. Set the gap. Dominance the tube quick to your cheek and impression for escaping air whether needful (gape A). Lightly Rugged up the world around the hole with sandpaper.
4. Apply glue both to the tube and a rubber patch. Wait for the glue to become tacky before applying the patch.
Check the tire to fine the source of the puncture by running your fingers around the inside of the tire. Be careful, sharp objects may be imbedded in the tire. Visually inspect the outside of the tire for rips, tears or sharp objects. Be sure to remove the offending object so you don't get another flat!7. Reinstall the tire, inner tube and wheel according to the steps in Change a Bicycle Tire, "Installing the new tire."
5. Firmly press the patch onto the hole (see B) and allow it to dry for several minutes.6.
8. Replace the patched tube with a new inner tube as soon as possible.
9. If you plan on riding a lot, carry a pump and a patch kit, and even replacement inner tubes, on your bicycle at all times.
