When it comes to the edges blend them down smooth with remainder of the car's panel. Use the fine grit sandpaper for the final touch up. This works for scratches too!4. Apply a primer making sure to cover a little larger area then where the ding is.
2. Utilize the item putty in humble thin layers. You may hog to do this a couple of times to receive a good layer in the depression. You are not trying to blend yet don't use too much or you will need lots of touch up with the dremel and elbow grease. Allow time for puddy to dry and bond with car. (Know when to ask for help when you need it.)
3. Sand away the top layer of the putty that is in excess.
We all slap so dense to avoid those imperceptible dings at the grocery store or Gauze station parking parcel on the other hand inevitably it happens. Save a bundle by doing your own touch ups for toddler dings.Instructions
1. Launch by removing any rust and loose whitewash with the dremel stuff from the ding on your vehivle. The high-reaching rapidity Testament smooth the ding outside of the automobile.Allow to dry and sand lightly. Apply a few layers of matching color paint and sand lightly between layers. With little effort you should no longer notice the effected area. Congrats you have repaired your own vehicle.
