Allot a Toyota Camry Brake Fluorescent
Eventually all glowing bulbs burn absent. Over future the corresponding is correct for your Toyota Camry brake lights.5. Locate the center bulb. This is the brake light bulb.6.
Bare the Chauffeur's side door and pull the Timber Proceeds switch. Free the Timber.
2. Treasure the rear glossy meeting contain in the Timber. Note that it is a hard plastic rectangular cover directly behind each rear light assembly.
3. Locate which light needs replacement and make a mental note. Have a partner Stare at the brake lights while you depress the brake petal, if you are unsure.
4. Grasp the sides of the cover firmly and pull it open. There is a hinge on the outer side of the cover.
Fixing the brake brilliance is peerless a trouble of replacing the burned elsewhere bulb with a fresh bulb and is a relatively light assignment you can perform yourself without the obligation for a good mechanic or best tools.
Instructions
1.Twist the bulb and connecting electrical boot counterclockwise and pull it directly out of the light assembly.
7. Remove the bulb from the electrical boot by pulling it directly out.
8. Insert a new 5W type C brake light bulb into the electrical boot. Push the bulb directly into the boot until it is snugly connected.
9. Insert the electrical boot back into the light assembly, lining up the pins on the boot with the cut-out sections in the assembly. Twist the boot clockwise to secure it.
10. Test the brakes and have a partner check to make sure the new bulb is working properly.
11. Swing the cover closed and press it until you hear an audible "click." Close the trunk.
