3. Remove the door switches by prying up one side with a screwdriver and pulling them elsewhere of the door panel. Disconnect the wiring harness by pulling the adapter plug apart at the switch. Compass the switch meeting aside.
Instructions
1. Proof the fuses at the Chauffeur's kick panel for burned-out filaments. Transform any that are blown and effort the window again. Provided all other windows endeavor apart from this one, the topic is probably the Engine.
2. Disconnect the battery by turning the convinced terminal bolt counterclockwise and placing it aside.
The Jeep Cherokee was manufactured with optional force windows, which applicability a motor-driven window regulator to elevate and lower the glass. Damage to this Engine, or any gap in the electricity required to fall it, can consideration a window failure. The morals backyard mechanic can repair a faculty window in approximately an day.
4. Remove the door panel by turning the screw inside the interior door handgrip counterclockwise. Turn the arm rest bolts counterclockwise, and allot all hardware aside.
5. Pull the door from the plastic pop rivets holding it to the metal by starting at one corner and tugging firmly on the panel's limit. Proceeding along one side until all of the rivets are disengaged. The plastic rivets can emerge as brittle with time and may hurting for replacement.
6. Disconnect the Engine from the wiring harness by pulling the adapter plug apart. Turn the Engine mount bolts counterclockwise, then pull the Engine from the window regulator gears.
7. Alter the Engine with a new unit by placing it into the window regulator gears and turning the mount bolts clockwise. Reconnect the wiring harness by pressing the plugs together.
8. Replace the door panel by pressing it firmly against the door metal, engaging all of the pop rivets. Turn the arm rest bolts and interior door handle screws clockwise until they are snug.
9. Replace the switch assembly by pushing the adapter plugs together and pressing it into the door panel until it is seated.
10. Reconnect the battery by turning the positive terminal bolt clockwise.
