While it is unlikely that metal flakes will fly up with thin sheet metal and sheet metal shears, it's wise to proceed with caution.3. Place your clamp on your work table. Clamp the sheet metal down securely. Simply location your boundaries with a grease pen and decrease.
Instructions
1. Domicile your chapter metal on your work table. Measure and mark your cut lines with your tape measure and grease pen.
2. Put on your safety gloves and goggles to protect your hands and eyes.With Correct Safeguard and a unharmed workspace, cutting thin phase metal can be as child's play as cutting a parcel of paper. Sheet metal shears are specious specifically to maintenance with creation straight, Disinfected cuts in thin metal sheeting. Protective gloves remove the risk of cutting your hands on the sharp edges near the cuts. The shears, whether guided with basic stabilization, catching keeping of eliminating frayed edges.
4. Plug in and turn on your electric sheet metal shears, or place your manual handheld shears at the cut line. Cut slowly across your lines.
5. File down the edges where you cut to make them smoother. Place your file at the cut lines and scrape off the perforations in a firm and measured motion.
