The most considerable Element of the 1994 Mustang's cooling action is its radiator. As the radiator coolant travels throughout the engine, its carries with it heat produced by the engine and directs that heat to the top of the radiator. The coolant then trickles down a series of passageways in the radiator, where it is cooled before returning to the engine via the backside radiator hose. Whether the passageways shift clogged, the radiator's effectiveness Testament diminish and it must be removed and either repaired or replaced.
Disconnect the two cooler lines from the backside of the radiator with a shine seed wrench whether the Mustang is equipped with automatic transmission. Rotate the integral devotee on the limitation of Everyone column in a counterclockwise method with the wrench.6. Remove the two bolts that secure the overflow receptacle to the engine compartment with a socket wrench.
Twist the radiator cap off of the top of the radiator after allowing the engine to algid.
3. Withdraw the radiator coolant into a container by removing the bolt at the replica of the radiator with a wrench. Make sure that the container is Disinfected whether the coolant Testament be reused.
4. Slacken the clamps that secure the upper and lower radiator hoses to the radiator with pliers and pull the hoses off of the radiator.
5.
Instructions
1. Remove the dissension battery cable from the battery with a wrench to avoid the opportunity of the radiator fan inadvertently turning on.2.Lift the container absent of the engine compartment.
7. Disconnect the electric fan's wiring connector from the Mustang's wiring harness by urgent the two Proceeds tabs well-balanced on the connector and pulling the connector gone of the harness.
8. Remove the bolts that secure the fan meeting to the back of the radiator with a socket wrench.
9. Lift the fan meeting outside of the engine compartment.
10. Remove the screws that secure the radiator's plastic cover to the top of the radiator with a screwdriver and lift the cover off of the radiator.
11. Remove the bolts that secure the top of the radiator to the engine compartment with a wrench and lift the radiator out of the engine compartment.
