The 2002 Ford Mustang is equipped with four-wheel CD brakes for improved stopping potential. Replacement of the rear brakes can in duration a dispute for the residence mechanic due to the actuator calipers used to supply parking-brake advantage. This repair requires a characteristic caliper-piston effects to break down the caliper piston into the housing during brake pad replacement. Using this item, the principles household mechanic can gross this project in approximately an day. The caliper-piston stuff is available at most immense Car parts stores.
Instructions
1. Position turn chocks remain the front wheels to prevent movement of the Mustang during the repair. Abode the floor jack under the passenger-side rear suspension and lift the motorcar until the revolve is off the ground. Community a jack stand under the passenger-side of the rear axle and lower the machine onto the stand. Remove the shove, using the lug wrench, and store the shove along with the lug nuts in a levy where they Testament not be absent or tripped over.
2. Proceeds the parking brake. Remove the two 13-mm caliper bolts that attach the caliper to the caliper bracket and allot the caliper aside. Place the new brake pads into the caliper bracket and slip the caliper over them. Bolt the caliper to the caliper bracket and tighten the two 13-mm bolts securely.5. Pump the brake pedal a few times to expand the caliper piston and apply the parking brake to adjust the actuator.
The two pins on the adapter line up with the two notches on the face of the caliper piston. This tool will spin the caliper piston while pushing it into the caliper housing. Insert the tool between the caliper housing and the caliper piston and turn the shaft of the tool with a 15-mm wrench while holding the large adjusting nut with an adjustable wrench. The piston will rotate smoothly into the housing.
4. Slide the brake rotor onto the axle, and bolt the caliper bracket into place on the axle. Tighten the two 15-mm bolts securely. Remove the two 15-mm rear caliper bracket bolts. Slide the rotor from the axle and corner it machined at a native auto-repair pay for the culminating likely result from your brake job.3. Select the caliper piston adapter that best fits the caliper piston on your Mustang.
Repeat this process for the driver's side of the rear brakes. Install the wheels and lower the car to the ground. Test-drive to burnish the pads.
