A panoramic sunroof is one of the newer sunroof options for vehicles. While a bit expanded expensive to install than other sunroof styles, many clan bargain the expanded idea of the sky expenditure the additional bankroll and accomplishment. Provided you're going to pop to install a panoramic sunroof yourself, there are a unusual matters you extremity to comprehend.
Instructions
1. Figure if your vehicle is equipped for a wide sunroof by contacting a dealership committed to the adjust of your automobile. after mart wide sunroofs can normally installed in vehicles that pass them as options on virgin cars, such as the Mini-Cooper, Subaru Outback Wagon, Malibu Maxx and Graft TC, further as distinct minivans and SUVs.
2. Decide if you hankering to install an operable or fixed-glass panel sunroof. Insert the wind deflector by using the washers and sealers that are included with the kit.11. Place the sunroof into the cutout area and confirm that the sealing rubber is in place. Insert the front and rear clamp frames along with the supports and connect the operating switch and wires.
Obtain a sunroof installation apparatus from an Car parts store or an online store. Most reward in the compass of $100 to $200.
4. Converge all of your supplies for the project, including a heavy-duty saw or nibbler, an electric drill and an electric die grinder. You will also need wrenches and screwdrivers.
5. Remove the template from the sunroof kit and place it on the roof of your vehicle. Using chalk, trace around the sunroof template on your car roof. Leave the template in place for the moment (you may want to tape it down) so that you can see where the holes should be drilled for the wind deflector.
6. Drill holes for the wind deflector in the places marked on the template. Most kits will require a total of six holes.
7. Use a nibbler, die grinder, or saber saw to chop around the chalked outline you have made on your car roof. Once you've removed the metal rectangle from the roof ribs, you can discard it.
8. Disconnect the interior light and remove it from the vehicle.
9. Remove the hard headliner with a razor knife so that it follows the outline of the roof cutout. Affix the protective foil strips and side strips along the edges of the hole you've created in the roof.
10. The fixed-glass account is easier to install, by reason of you don't demand to contend with any mechanical components. Provided you demand a sunroof for ventilation very as viewing purposes, you'll wish an operable legend.3.
Confirm that the operating switch works properly.
12. Complete the installation by positioning the front, side and rear covers with the push-in fasteners. Align the edge protection and trim all of the excess material with pliers.
