Fire the stud welding system, thus attaching the draw pin to the surface of the fuel tank.3. Hook the end of the slide hammer on the draw pin. Concession it to professionals.
Instructions
1. Load a frame pin fastener into the stud welder chuck of the stud welding method. Position the stud welding manner so that the attract pin is adjacent to and touching the surface of the fuel tank dent.
2.
Fuel vehicle dents are a nuisance, with consequences ranging from decreased cistern aesthetics to decreased fuel energy. While some dents can be repaired Homewards with suction kits, some dents are so severe that they need a competent to "pull absent" the dent, using welding procedures. Weld repairs want welding a fastener to the surface of the dent, then pulling gone the dent, using a slide hammer. This procedure, provided performed by the uninitiated, can arrangement in grim harm to the subject extremely as the receptacle.Keep a steady grip on the slide hammer, and throw the weight of the hammer, which slides freely on the shaft of the slide hammer, toward the handle of the hammer. Throwing the hammer weight will pull forcefully on the draw pin, and will "pull out" the dent to which the draw pin is attached.
