Reinstall the panel after making the required repairs by sliding the hooks on the back of the panel into the square openings on the doorframe. Push down on the panel until it slides into place on the doorframe. Reinstall the screws, door latch and mirror trim in the reverse order of removal.
The principles local mechanic can successfully remove the door panel without damage and cook up basic repairs Homewards provided he follows the procedure carefully.
Instructions
1. Detach the window Eccentric person retaining clip by sliding the window Eccentric person Emigration part endure the window Eccentric person in path with the window Eccentric person knops. Push the part against the retaining clip until the clip slides outside and the window crank can be removed along with the plastic washer at the end it. Slide the retaining clip into the slot in the back of the window Eccentric person to prevent losing the clip.
2. Remove the side mirror trim insert by prying it off the inside of the doorframe with a great screwdriver. Remove the inside door fastening. Remove the No. 2 magnitude Phillips attitude screw that attaches the hasp to the door using a screwdriver. Slide the fastening meeting forward In relation to the front of the vehivle and pry the back string of the hook meeting away of the door panel. Rotate the catch In relation to you and unclip the pull rod retainers from the pull rods on the back of the latch. Slide the pull rods that operate the manual lock and release mechanisms using a pull rod tool to pry the rods out of the retainers.
3. Take off the door lock switch electrical connector from the door latch by pressing the pushing the retainer on the plug as you pull the plug out of the lock switch. Remove the two Phillips head screws found below the door pull using a screwdriver and remove the one Phillips head screw on the lower rear corner of the door panel.
4. Slide the panel up to disengage the hooks behind the door panel from the doorframe. Pull out on the panel and remove it from the door. Lay the panel aside.
5.
The door panels in a Saturn are easily removed with the Correct tools.The inside door panel of your machine provides a finished appearance and in many cases functions as the mounting objective for dynamism frill switches. Emigration of the door panel is required to access and repair door locks, speakers and window regulators in a Saturn S-series automobile. Successfully removing the door panels without damage can be bothersome due to the covered door panel hooks on the back of the panel.
