Lay the emery paper flat with the backside facing toward you. Stand the eraser end of a pencil over the center of the emery paper strip. Pull both strips up on both sides of the pencil and tape the paper to the pencil. Cleaning a headlamp socket contact Testament remove the carbon and admit your lantern working right.
Instructions
1. Unplug the headlight endowment cord from the electrical Issue. Remove the lampshade and unscrew the light bulb.
2. Tear of a strip of emery paper half the length of a pencil.Provided you comment your ablaze bulb in a headlamp is flickering, it might be since of soiled contacts in the headlamp socket. The contacts in the luminous socket assist to adequate the electrical order between the bulb and headlamp when you turn on the switch. Over lifetime, carbon builds up on the top of the contacts. The carbon causes a empty-handed connexion between the bulb and the contacts.
3. Rub the tops of the lamp socket contacts with the emery paper as if you were erasing paper. Apply light even pressure when rubbing the contacts.
4. Spray a couple of quick bursts of compressed air into the socket to remove the fine dust. Gently lift each contact up slightly with the needle nose pliers. The contacts just need to be off the bottom of the socket.
5. Screw the light bulb back into the socket and reinstall the lampshade. Plug the power cord back into the electrical outlet.
