Thursday, January 8, 2015

Repair Broken Obvious Coat Fresh paint On The Vehicle

Remove all debris such as rocks and dirt, too as rust and bubbling paint if there is any.2. Sand rough or rusted spots with the 1500 grit sand paper until they are smoothed down. You Testament need a very fine sand paper or buffer to smooth or remove the damaged paint.


Instructions


1. Wash your car.

Retouching faded or cracked light coat tint is a not difficult and active method to civilize the appearance and cost of your motorcar. It can be done by a novice with matchless a bit of preparation and is inconsiderable to memorize. You should hog your supplies, remarkably the dye, ready before you dawn.



3. Sand using the 2000 grit until the edges of the paint are smooth against the colored paint of the car, then wash all the paint dust off.


4. Paint the car using your car paint if the colored paint has been sanded too thin. Use an air brush machine with fine control or a paint pen to only paint the newly sanded section.


5. Wait for the paint to dry, then protect the paint by spraying on a new layer of clear coat paint.