Whether you accept discovered that your floorboards, seats or machine sprint are wet next drizzle or Forenoon dew, it is feasible that you posses a leaky window, yet whether you haven't absolutely seen precipitate future in. You may further detect a musty or mildew-like odour in your machine that comes from the van's interior regularly getting wet. As faraway as the causation of the leak is baby, finding and repairing a van window that is leaking is a engagement that many persons can manipulate on their own.
Instructions
1. Sit in the rear seat of the machine and obtain someone else spray H2O on the vehicle with a garden hose to set the window that is leaking. Timer all of the side windows and the windscreen to bargain absent where the baptize is forthcoming in.
2. Remove the trim from around the edge of the window that has the leak. Find the seam of the trim, which is generally at the bottom on side windows and at the top corners on the windshield. Pull the trim out from the window slowly and it will pop free of the window edge.
3. Inspect the edge of the window for missing caulking or black, mildewed spots in the caulking. Also, Stare at the edges of the window for cracks or chips in the glass.
4. Add new caulking if there is missing or damaged window caulk. Remove the old caulking by carefully trimming it away with a utility knife or razor blade and clean the area thoroughly with rubbing alcohol to remove leftover debris. Don't let the alcohol drip onto the good caulking.
5. As long as the trim was not bent during removal, it should be easy to push back into the ridge.
Use silicone rubber on cracks at the edges of the window. Silicone rubber will stop leaks from small flaws and will be covered up once the trim is put back into place.
7. Press the trim back into place all around the edge of the window. Replace the caulk with polyurethane sealant or silicone caulk using a caulking gun. Polyurethane sealant and silicone caulk are available in home improvement and hardware stores.6.
