The Ford Taurus uses an electrical soak pump to circulate engine coolant throughout the engine. The electric Engine inside the pump can burn away, or the seals inside the pump may cause to leak, causing the Ford Taurus engine to overheat/ This can engender sever damage to the engine. The water pump should be replaced at the fundamental indication of complication.
Instructions
1. Disconnect the ground cable from the rejection battery terminal by using a wrench to loosen the retaining bolt. Pull the clamp off the terminal.
2. Allot the petcock valve on the lower fitting corner of the radiator. Berth a dissipate oil congregation pan underneath the valve. Unlocked the valve by using a bodkin nose pilers to turn it counterclockwise. Once all the coolant has drained outside brisk the petcock valve.
3. Loosen the hose clamp that secures the inlet tube to the imbue pump and pull the tube off the pump.
Lift the water pump out of the engine and remove it from the vehicle.
Loosen the hose clamp that secures the heater hose to the water pump and pull hose off the pump.
6. Remove the bolts that secure the water pump to the engine block.
7.4. Cover a 1/2-inch handle breaker bar into the sash tensioner. Turn the breaker bar clockwise to Proceeds the tension on the girth and remove the belt.5.
