Edelbrock is among the most recognizable names in the grand performance automotive cosmos. In system in that the overdue 1940's, Edelbrock is proclaimed for manufacturing different colossal performance automotive parts of the highest genius. Installing an Edelbrock carburettor is an distinguished behaviour to correct both the reliability and performance of a vehicle. Do not use silicon or gasket sealer to secure the gasket.3. Carefully place the Edelbrock carburetor over the four studs located at the top of the intake manifold. Ensure that the red Edelbrock logo on the carburetor is facing towards the front of the vehicle.
Assure that the top of the intake manifold where the carburettor sits is clear from debris, dirt, oil and other Non-native substances.
2. Install the carburettor model gasket by sliding the gasket over the four carburettor studs on the intake manifold. Although cutting edge Edelbrock carburetors charge no adjustments, these carburetors are among the easiest to adjust should doing so ever alter to essential.
Instructions
1.4. Install the four nuts over the four studs to secure the carburetor in place. Take care not to over tighten the studs, which will damage the carburetor base gasket installed in step 2.
5. Locate the flared inlets around the base of the carburetor. These inlets are for any accessories the vehicle may have which operate off of a vacuum, such as power brakes. If the vehicle is equipped with such accessories, slip the hoses for these accessories over these inlets and secure them with a hose clamp. If the vehicle does not have any vacuum accessories, these inlets may be plugged with rubber plugs available at any automotive parts store.
6. Install the throttle cable. The throttle cable attaches to the throttle linkage located on the driver's side of the carburetor. The throttle linkage on the carburetor has several different holes that the throttle cable can attach to. Simply slip the cable through the appropriate hold in the linkage and secure the cable with the stock bolt, nut, or clip. An Edelbrock throttle cable adapter may be required depending on your particular application.
7. Connect the fuel line to the carburetor. The fuel line attaches to the large metal flare on the passenger's side of the carburetor. Secure the fuel line with a clamp.
